PH Controller with Dosing Quantity and delay

8,200

10 Days Returnable;
1 Year Warranty and 6-7 years nominal Life in a Normal Atmosphere.

  1. Auto Calibration 2 Point for 4 and 7 pH by Soft Touch Buttons
  2. Set-Point for High and Low Level 2 Nos
  3. Potential Free Relay Output 2 Relays
  4. Set Quantity to be the dose at once in ML.
  5. Set Wating Time in Minutes for Evaluation pH Value Before Dosing Starts
+ -

pH Controller for Chemical Dosing | PH Controller with Dosing Quantity and delay
PH Controller with Dosing Quantity and delay
8,200
     
Total Price: 10,000

PH Controller with Dosing Quantity and delay

Seting of Alarm Levels: PH Controller with Dosing Quantity and delay
Lower Level Dosing Pump / Alarm Setting: Press the Set button once, use the UP and DN buttons to set the Higher level alarm/relay output if pH Value of the solution goes more than this value relay 1 will turn ON and provide its potential-free contact as output.
Higher Level Dosing Pump / Alarm Setting: Press the Set button twice, use UP and DN buttons to set Lower level alarm/relay output if pH Value of solution goes Less than this value relay 2 will turn ON and provide its potential-free contact as output.

Setting Delay and Quantity to be Dose

Set Delay Time To stabilize pH Value before Dosing starts: Press Set Button Three Times and set time in Minutes using UP and DN buttons
Set Dosing Quantity in ML for Dosing: Press the Set button 4 Times and set Dosing quantity in ML for Dosing at once, after waiting time this cycle will repeat again please note that we have to set Speed of Dosing pump 1st time accordingly
Press / Push ENT button once to save changes

Working Principle of : PH Controller with Dosing Quantity and delay

This pH Controller is specially designed for Best Results of Auto Dosing.By this Controller we may avoid problem of over dosing. because actual change in pH value of Solution due to Dosing of Chemical takes time , this controller wait for change and act if needed.
Hence We Have to Set Higher and Lower Limits of pH Solution required
Now Set Quantity of Chemical to be Dose in to solution at once and
Set Waiting Time after Dosing to evaluate actual change due to last dosing of chemical
the controller will check the results very gently and dose the chemical again if required

Specification : digital-ph-controller-india

  1. Range : 0.00 to 14.0 pH
  2. Resolution : 0.10 pH
  3. Tolerence : +/- 0.10 pH
  4. Input: pH Probe any Brand BNC Connector
  5. Set Point 2 Nos for Upper Limit and Lower Limit
  6. Output : 2 Potential free Relay Output
  7. Calibration: Auto Calibration Push Buttons on Front Panel; 4pH and 7pH Value
  8. Display: Seven-Segment Bright LED Display
  9. Operating Voltage: 220 Vac
  10. Size : 96 * 96 * 110
  11. Body: PP/ABS

Types of pH Meters

Hence we supply a wide range of pH Meters. While use and application are different. We Introduce here 6 types of pH Meters; So please click on link given here 1 to 6; if you want to “Know More about” any product; and technical specifications. While “click here”; if you are interested to know more products in this range.digital-ph-controller-india

  1. Digital pH Meter : Online Panel Mounted with 2 point calibration.
  2. Online pH Meter :  with 0 to 10 volt analog output and 2 point calibration
  3. Digital pH Meter  : with 0-20 MA output and 2 point calibration
  4. Digital pH Meter  : with 485 Modbus protocol and 2 point calibration
  5. pH Meter Table Top : for Laboratory use and 2 point calibration
  6. Sensor / Probe / Electrode for pH Meter / pH Controller

pH Controller distributor and supplier : digital-ph-controller-india

Hence we are supplier / dealer of Digital pH Controller Online. We have many type of pH Meter as well as Controller. We design there meters as per your requirement. Hence please click the link; given below to Reed more about given products. Or “Click Here”; to see more products in this category. digital-ph-controller-india

  1. Online pH Controller with 2 Point Calibration, 1 Set Point and Single Relay output
  2. Digital pH Controller with 2 Point Calibration, 2 Set Point and 2 Relay output
  3. Online pH Controller Online with 2 Point Auto Calibration, 2 Set Point and  2 Relay output
  4. pH Controller Online with 2 Point Auto Calibration, 2 Set Point and  2 Relay output, Dosing Quantity and Analysis Time Setting

pH Meter

Like MCS Facebook Page for recent offers & Updates! 

  1. Range : 0.00 to 14.0 pH
  2. Resolution : 0.10 pH Tolerence : +/- 0.15 pH
  3. Output : 2 Relay Output
  4. Calibration: Auto Calibration front panel Touch Buttons; 4pH and 7pH Value
  5. Input: pH Probe any Brand BNC Connector
  6. Display: Seven-Segment Bright LED Display
  7. Operating Voltage: 220 Vac
  8. Size : 96 * 96 * 110
  9. Body: PP/ABS

CALIBRATION Process

Calibration 7 pH
Dip the Electrode in standard Solotion of 7 pH Value, wait for 10 Seconds to stable value
Touch UP Button for auto-calibration of 7 pH

Calibration 4 pH
Dip the Electrode in standard Solution of 4 pH Value, wait for 10 Seconds to stable value
Touch UP Button for auto-calibration of 4 pH

Press SET and ENT buttons at once to factory calibration for 4 and 7 pH

Based on 0 reviews

0.00 Overall
0%
0%
0%
0%
0%
Be the first to review “PH Controller with Dosing Quantity and delay”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Category: Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
Call Us Now
Navigation
Close

My Cart

Close

Wishlist

Recently Viewed

Close

Great to see you here !

A password will be sent to your email address.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Already got an account?

Close

Categories

You can see who we've worked with near you that you might know for a reference by browsing our hierarchical portfolio directory below. For online ph meter, cities we serve include Dādri, Dankaur, Dāsna, Delhi, Farīdābād, Ghāziābād, Greater Noida, Gurgaon, Karol Bāgh, Nāngloi Jāt, New Delhi, Noida, Palwal, Pitampura, and Sohna.
Translate »