PH Sensor Toshcon 5 meter Cable


₹2,850 ₹1,800
pH Sensor / pH Electrode / pH Probe Toshcon.
Indstrial use, Online
PH Sensor Toshcon 5 meter Cable
design and Construction of pH meter Probe, PH Sensor Toshcon 5 meter Cable
1. Glass bulb: It is a sensor that senses the H+ ion concentration and it is made from special type of glass and membrane. The glass bulb consists of 0.1 M HCL Solution.
2. Internal electrode: this electrode made by silver chloride.
3. Internal solution: The silver chloride electrode dipped in buffer solution of 0.1 mol/L KCL of pH 4 to pH 7.
4. Reference Electrode: It is also the silver chloride electrode use for reference.
5.Junction: It made from ceramic junction also called as diaphragm that allows the contact of sample solution and reference electrolyte. It should not disturb the electric connection between both electrodes.
6. Filling hole: It used for refilling the electrolyte if required.
7. Electrode body: the body is from non-conductive glass or plastic material and may coated by epoxy to prevent glass bulb.
PH Sensor Toshcon 5 meter Cable
when acidic solution is rich in H+ ion concentration. When pH probe dipped in an acidic solution. The H+ ion moves close to the glass membrane of the sensitive glass bulb (external side of the bulb). Hence Similar reaction occurs inside the bulb. Which filled with buffer solution of neutral pH 7. This neutral buffer solution has constant number of Hydrogen ions. The H+ ions present inside the bulb also moves close to glass membrane (internal side of the bulb). Hence, this causes the difference in the concentration of hydrogen ion or degree of hydrogen ion activity across the membrane causing difference in the potential (voltage). When the hydrogen ion concentration inside the glass bulb is less than the outside solution (test solution), then the given solution is acidic and hence the pH is lower than 7.
When the Hydrogen ions concentration across the membrane similar then it called as neutral pH. And the pH equal to 7. while If the concentration of hydrogen ion of inside the bulb than outside solution then the given solution is alkaline and the pH is more than 7. Hence pH meter measure the potential difference at both the electrodes and calculate the pH as per the Nernst equation.
- Range : 0.00 to 14.0 pH
- Resolution : 0.10 pH
- Tolerence : +/- 0.15 pH
- pH Probe any Brand BNC Connector
- Body : PP/ABS
CALIBRATION Process
Calibration 7 pH
Dip the Electrode in standard Solotion of 7 pH Value, wait for 10 Seconds to stable value
rotate screw of pH-7, and set display to 7.00
Calibration 4 pH
Dip the Electrode in standard Solotion of 4 pH Value, wait for 10 Seconds to stable value
rotate screw of pH-4, and set display to 4.00
Based on 0 reviews
0% | ||
0% | ||
0% | ||
0% | ||
0% |
Related Products
pH Sensor / pH Electrode / pH Sensor / pH Sensor ON-Line
Cable Length 5 Meter, BNC Connector
for Industrial use, Epoxy Coated unbreakable.
10 Days Returnable;
Heavy Duty Industrial use 24×7 working
1 Year Warranty and 6-7 years nominal Life in a Normal Atmosphere.
10 Days Returnable;
Heavy Duty Industrial use 24×7 working
1 Year Warranty and 6-7 years nominal Life in a Normal Atmosphere.
Portable pH Meter, Portable Laboratory Use 1 Year Warranty
6-7 years nominal Life in Normal Atmosphere.
10 Days Returnable;
Digital pH Meter Online (4-20 MA output ) for PLC / Computer Scada Communication
10 Days Returnable;
Heavy-duty Industrial use, 24×7 working
1 Year Warranty and 6-7 years nominal Life in a Normal Atmosphere.
10 Days Returnable;
1 Year Warranty and 6-7 years nominal Life in a Normal Atmosphere.
- Auto Calibration 2 Point for 4 and 7 pH by Soft Touch Buttons
- Set-Point for High and Low Level 2 Nos
- Potential Free Relay Output 2 Relays
- Set Quantity to be the dose at once in ML.
- Set Wating Time in Minutes for Evaluation pH Value Before Dosing Starts
Online pH Meter Manufacturers in India
1 Year Warranty
- Range : 0.00 to 14.0 pH
- Resolution : 0.01 pH
- Calibration : Front Panel Screw; 4pH and 7pH Value
- Input: pH Probe any Brand BNC Connector
- Display: Seven-Segment Bright LED Display
- Operating Voltage: 220 Vac
- Size : 96 * 96 * 85
- Body: PP/ABS
pH Probe / pH Sensor/ pH Electrode Toshcon
1 meter cable length BNC Connector
Digital pH Meter Online with 4-20 MA output for PLC / Computer Scada Communication
10 Days Returnable;
Heavy-duty Industrial use, 24×7 working
1 Year Warranty and 6-7 years nominal Life in a Normal Atmosphere.
pH Meter Table Top, Laboratory use, Heavy Duty, 1 Year Warranty and 6-7 years nominal Life in Normal Atmosphere.
10 days Returnable
10 Days Returnable;
Heavy-duty Industrial use, 24×7 working
1 Year Warranty and 6-7 years nominal Life in a Normal Atmosphere.
2 Set Point, 2 Potential free relay output for high and low level
10 Days Returnable;
1 Year Warranty and 6-7 years nominal Life in a Normal Atmosphere.
2 Set Point, 2 Potential Free Relay Output for High and Low Level
Reviews
There are no reviews yet.