TDS Controller Dosing setting
TDS Controller with two set points and 2 Relays potential free Output / TDS Controller Dosing setting
Set the Upper ad lower value of TDS using SET, UP, and down Buttons, and Save the value by pressing the ENT button.
Set quantity to be dose in Term of ML and delay before start pump in minutes to evaluate actual value
The concern relay will trigger at the set value and change its state NO/NC (5A) Contact; potential-free contacts are provided in each relay. that may use to start a pump or alarm as an indicator.
Automatic TDS Controller with 2 Relay Time for evaluation and Dosing ; TDS Controller Dosing setting
While PPM (Particle per Million) TDS value (Total Dissolved Solids) gives the sum of total dissolved solids in water. Hence These solids may be salts, minerals, and metals. Mostly Sodium and magnesium salt fond dissolved. TDS measred in PPM.
Hence The conductivity of the water or any solid / liquid measured; indicates ions are in the water, the better it conducts electricity. While TDS meters typically quantify this conductivity; in micro siemens UCM or MCM. Hence The latter stands for parts per million; i.e. the number of solid particles per one million water mixture particles. A value of 40 ppm means that from one million particles there are 40 dissolved ions and the rest (= 999 960) are water molecules. TDS Controller 2 SetPoint
Best TDS Controller On India | TDS Controller Dosing setting
What does it mean about the water quality?
Hence DM water with a ppm value of zero, is automatically free from any pesticides and drug residues, is far from it. While All the TDS meter measures are merely the number of ions in the water. Most of the pesticides; hormone-disturbing substances, and drug residues are usually no ions.
Digital TDS Controller 2 SetPoint
Hence In short: water with a low ppm value is virtually free from salts and minerals; but can hide a large cocktail of non-ionic chemicals in itself. While The result of a TDS meter is therefore not very meaningful; with regard to the actual water quality. while Other analytical methods or a water analysis by a reputable laboratory; may be better suited to find out about the actual water quality. TDS Controller Dosing setting
Observation as analyst ; TDS Controller 2 SetPoint
Hence if you want to check the functionality of an osmosis system; Then the mere TDS values are not suitable as an indicator of the water quality. Hence extensive and detailed water analyzes are often very expensive and only reflect a snapshot; While they are only advisable if the drinking water is to be tested; for individual substances. Hence It often makes more sense to invest; in a high-quality water filter right away. While This way you have more security with your daily drinking water; consumption in the long term. Hence it is essential to pay attention to appropriate assessments and long-term studies.
- Range : 000 to 9999 PPM
- Resolution : 1 PPM
- Tolerence : +/- 1 PPM
- Output: 2 separate relays output for upper ad lower levels
- Calibration: Front / back panel knob
- Input: TDS Probe any Brand
- Display: Seven-Segment Bright LED Display
- Operating Voltage: 220 Vac
- Size : 96 * 96 * 110
- Body: PP/ABS
Front / Back panel knob provided
Based on 0 reviews