Conductivity Controller 2 Set Point, Time Delay and Dosing setting

8,500

Conductivity controller with dosing Quantity and Delay Time before starting dosing
10 Days Returnable;
Heavy Duty Industrial use 24×7 working
1 Year Warranty and 6-7 years nominal Life in a Normal Atmosphere.

+ -

Conductivity Controller 2 Set Point, Time Delay and Dosing setting

OPERATION

Work Instruction Digital Electrical Conductivity Controller For Dosing
1. SETTING RELAY OPERATION
SET High limit and Low limit of EC Value for Buzzer / Relay Operation

a) Press the SET button Upper display shows H-EC the higher limit to set and lower display shows the value of H-EC already set Press UP and DN buttons to set Higher Limit
b) press the SET button once again to set Dosing Quantity in ML-1 if EC Value goes higher from H-EC then the concerned dosing pump will dose ML-1
c) Press the SET button once again Upper display shows L-EC the lower limit to set and the lower display shows the value of L-EC already set
d) press SET button once again to set Dosing Quantity in ML-2 if pH Value goes lower from LPH than concerned dosing pump will dose ML-2 quantity
e) Press the SET button again to Set Delay Time DELY in Minutes. It works if EC Value goes more than H-EC or less Than L-EC value than Dosing will Start after this delay for a set value of Quantity in ML-1 or ML-2, after dosing it will further wait for monitoring EC Value before next dosing.
f) Press SET Button again or ENT button to save the changes else change will remove after power OFF

What is TDS?
The PPM (Particle per Million) TDS value (Total Dissolved Solids) gives the sum of total dissolved solids in water. These solids may be salts, minerals, and metals. Mostly Sodium and magnesium salt fond dissolved. TDS measured in PPM.
Conductivity Means: The conductivity of the water or any solid/liquid measured indicates ions are in the water, the better it conducts electricity. TDS meters typically quantify this conductivity in micro siemens UCM or MCM. The latter stands for parts per million, i.e. the number of solid particles per one million water mixture particles. A value of 40 ppm means that from one million particles there are 40 dissolved ions and the rest (= 999 960) are water molecules.

What does it mean about the water quality?
DM water with a ppm value of zero is automatically free from any pesticides and drug residues, is far from it. All the TDS meter measures are merely the number of ions in the water. Most of the pesticides, hormone-disturbing substances, and drug residues are usually no ions!

In short: water with a low ppm value is virtually free from salts and minerals, but can hide a large cocktail of non-ionic chemicals in itself. The result of a TDS meter is therefore not very meaningful with regard to the actual water quality. while Other analytical methods or a water analysis by a reputable laboratory may be better suited to find out about the actual water quality.

Observation as analyst
if you want to check the functionality of an osmosis system, the mere TDS values are not suitable as an indicator of the water quality. Hence extensive and detailed water analyzes are often very expensive and only reflect a snapshot, they are only advisable if the drinking water is to be tested for individual substances. It often makes more sense to invest in a high-quality water filter right away. This way you have more security with your daily drinking water consumption in the long term. However, it is essential to pay attention to appropriate assessments and long-term studies! Because the label “filters pesticides” can also mean, with an inferior filter, that only 5% of the pesticides are removed, or the retention rate drops rapidly after a short time.

PH Meter

Like MCS Facebook Page for recent offers & Updates! 

  • PRODUCT SPECIFICATION :
  1. Range: 0000 to 1999 ucm
  2. Resolution : 1 ucm
  3. Tolerance : +/- 1 %
  4. Set-Point: 2 Nos Lower level and Higher Level
  5. : Dosing quantity, Delay Time in Minutes
  6. Output : 2 Relay Output
  7. Calibration: Knobe Provided
  8. Input: Conductivity Sensor
  9. Display: Seven-Segment Bright LED Display
  10. Operating Voltage: 220 Vac
  11. Size : 96 * 96 * 110
  12. Body: PP/ABS

CALIBRATION

Calibration
Knobe Provided

Based on 0 reviews

0.00 Overall
0%
0%
0%
0%
0%
Be the first to review “Conductivity Controller 2 Set Point, Time Delay and Dosing setting”

Your email address will not be published.

Reviews

There are no reviews yet.

Navigation
Close

My Cart

Close

Wishlist

Recently Viewed

Close

Great to see you here !

A password will be sent to your email address.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Already got an account?

Close

Categories