Automatic Timer Electroplating

Automatic Timer Electroplating, Electronic Timer/ Automatic Timer used to measure Time of any process in Electroplating Industries.

Digital Timer

Digital Timer, This Timer has 1 Set-point and 1 potential-free relay out which change its state at set time is achieved.

Human Sensing Timer

While Digital Human Sensing Timer, used as Automatic Timer for Electroplating at Passivation Process.

Load Sensing Timer Barrel

While Load Sensing Timer Barrel also used as Automatic Timer for Barrel, So This Timer start its time if material loaded barrel dipped into the chemical tank and rectifier current passed through the plating job material.

Forward Reverse Timer

Hence Forward and reverse timer is used to operate any motor in the direction either Forward or Reverse or both continuously.

Setting Value of Preset Time

Push the SET Button at Once, Now use the UP and DN buttons to adjust the required value, then Press ENT button to save Preset Value.

Set Min / Sec / Hours

Hence Switch OFF the Power, Now Push and Hold SET Button with ENT at Once, Now switch ON the Power, Hence use the UP and DN buttons to Select the required value, Now Press the ENT button to save.

Set Decimal Point

Hence Push and Hold SET and DN Button at Once, Now switch ON the Power and Set Decimal Point if required Then Press ENT button to save.

Technical Specifications:

1. Range 000 t0 999 Sec / Min / Hours
2. Accuracy: 0.1%
3. Display: 3 Digit LED 0.56 inch character height
4. Relay Operation Guaranteed within 0.1 Second
5. Supply: 220 Vac
6. Body Plastic ABS