automatic ph Meter
It is a well known produt of MCS, pH Controller, automatic ph Meter used as teg line
about Machine Control Systems
MCS established in ballabgarh city of Faridabad district in year 1998 and engaged in manufacturing Electronic Instruments and Sensor.
MCS has manufactured a wide range of pH Meter and pH Controller so auto dosing controller faridabad is one of the main product. But this controller used for Chemical Dosing and Buzzer sound at Alarm levels.
Meter with 4-20 MA Output
Hence This meter display the actual pH Value of solution on its 7 segment 4 digits bright LED display. But this pH Meter is with 0.04 to 20 MA
pH Meter with 0 t0 10 VDC out put
Similarly pH Meter with 0 to 10 VDC out put, It also a good product of MCS having analog output and digital display.
Hence a wide range of pH Controllers also available in list of MCS Products. pH Controller with 2 point calibration 2 Set Point and 2 Relay Output
This is most required feature in chemical industry to maintain concentration of chemical, and to maintain pH Value of Solution.
pH Controller for Auto Dosing
pH Controller for Auto Dosing, Hence in this Controller set the High pH (HPH) and Low pH (LPH) Value in Controller to use this feature.
Relay Out Put
All pH Controllers has potential free relay output and these relay used to operate Dosing pumps or alarm system,
All pH Meters having 2 Point Calibration provided, some of which are by Potential meter screw and Hence some has Auto soft touch calibration
Manual Calibration at 7 pH
Dip the sensor / probe of pH Meter in standered solution of 7 pH and rotate the concern screw in manual settable ph meter and set display as 7 pH
Auto Calibration at 7 pH
Dip the sensor / probe of pH Meter in solution of 7 pH and press UP button for 3 Sec. Hence pH Controller / Meter will set and display 7 pH.
Manual Calibration at 4 pH
Dip the sensor / probe in solution of 4 pH and rotate the concern screw at front panel of ph meter and set the display to 4 pH.
Auto Calibration at 4 pH
Dip the sensor / probe in solution of 4 pH and press DN button for 3 Seconds Hence ph Controller will display and set at 4 pH automatically.
automatic ph Meter