Digital Oven Temperature Controller Industrial Oven Controller # Digital oven temperature Controller in Faridabad # Oven Controller in Delhi # Oven Controller in Gurgaon # Oven Controller in Noida # Oven Controller in Ghaziabad # oven Controller in Sonipat # Oven Temperature and Time Controller # Oven Temperature controller wirh Timer.
first of all we discuss about Digital Oven temperature Controller mfg by Machine Control Systems. because Digital Oven temperature Controller is used to control Temperature / time both. Hence Temp. Controller used to maintain heat in almost Industry. Likewise bakery / Chemical Industry / Food Process / Zinc / Nickel / Powder Coating / Plating etc. Similarly Oven Controller used to maintain time of backing. While Oven Controller connect to Panel. after Consider above all Now. Finally we discuss about Feature also
Used to Operate Oven most importantly
- Set High Temp. Limit (HtH) using up / dn button
- Set Low Temp. Limit (LtL) using up / dn button
- Set Baking / Hold Time (t-1) using up / dn button
- Select Mode of Time Sec. / Minutes
- Relay-1 maintain temperature with in range
- ON / OFF Relay with accuracy
- Relay-2 Conect for 3 second while temperature achieve 1st time.
- Relay-2 contact again for Alarm / Hooter / Buzzer after Holding time Ups.
- Auto Alarm / beep sound after hold time will reset after power Off
hence Oven Controller used to maintain temp. and below Alarm / Hooter / Buzzer as completion of Baking Time. therefore it is very useful
most importantly used in place of temp. controller and timer two items
Baking Oven / Heat Chamber / Drier Oven etc.
therefore used to maintain temperature and time accurately
now further more Features: Oven Controller # Digital oven temperature Controller in Faridabad # Oven Controller in Delhi # Oven Controller in Gurgaon # Oven Controller in Noida # Oven Controller in Ghaziabad # oven Controller in Sonipat
- Accurate Temperature display Finally
- Hence Calibration facility on front Buttons.
- Hence Set Relay deference between ON / OFF the Contact
- while Bright Red LED display / relay
- likewise Pleasing Touch Push switches
Hence we Discuss Other Details:
- Set Temperature Required
- Relay Difference between ON / OFF ;
- Set Timer Parameters
- Time required for baking / hold time
- Time in Second / Minutes set able
- Accuracy : ± 2 Degree Celsius temp.
- Accuracy : ± 0.5 % for Time in minutes / Seconds
- Display: 3 / 4 Digit LED 0.56 inch height
- Range: 000 to 1200 degree Celsius
- Range: 000 to 999 seconds / minutes
- Relay contact for Alarm / Buzzer
- Calibration : from front panel push buttons
- Alarm Reset by Push Button / power off
- Relay Output (2 Nos) : Contact 5 Amp at 220 Volt AC
- Supply: 180 V AC ~ 270 V AC at 50 Hz / 60 Hz
- Enclosure : Plastic ABS
- Type : Digital Double Display
- Size : 96 x 96 mm depth 155 mm
ABOUT Machine Control Systems (MCS) :
Machine Control Systems (MCS) is a well-known and reputed brand in Faridabad / Gurgaon / Delhi NCR. Even its products are very popular in nearby industrial area. MCS has started its production in year 1996. Because there was a blank in decade of 90’s. In the field of mfg. electronic digital meters and sensors. Its mfg. unit cum office settled in Tirkha colony Ballabgarh since 1996. MCS is a tinny / small scale industry but In decade of 90’s its products were popular in all over India,Even India’s reputed companies were the costumers of Machine Control. And its products were demanded from all over India. Because that was the time when Automation and robotics was surprising product for Indian industry. And there was no stockiest / supplier / manufacture of such products in India. Digital Oven Temperature Controller
Products and technology : Likewise MCS products are good looking best in design and technology. MCS has updated its technical staff with day to day growing technology and advancement. Max. MCS products are developed on Microchip Technology of PIC controllers. All meters and Controllers are designed with digital display. Here 7 segment LED display are mostly used.
Other products of Machine Control Systems are
MCS introduce a range of its products. Like safety sensors / safety barrier sensors / Safety light curtains / safety sensor etc. To protect human body / human parts from hazardous equipment. In case while any type of object / body part reached with in the range of these sensors. It used to stop the machine / generate alarm signal.
besides this Humidity Meter / Humidity Controller to check or control % Humidity. while for oven there is Oven Controller / meters available. Digital Oven Controller to control Oven Temperature as well as time of baking. On Delay Timer / Off Delay Timer / Cyclic Timer / digital Timer etc to measure time and control process. And for measure temperature Digital Temperature Controller / Temperature Indicator are introduced. Two Hand Operating Systems for mechanical power press, digital display for GO and NO/GO gauge, Digital Display with Alarm and Marking For Good and Bad Parts, Digital Preset Counter, IR Sensor, Proximity Sensor, Digital Counter, Digital Counter with Timer, Batch Counter, Laser Sensor, etc ;
Human / Workmen Protection Instrument
We know that Safety sensors / Safety barrier sensors / Safety light curtains / Safety sensor are used to protect. Human body / Human parts from hazardous equipment machine operations. It used to stop the machine or generate alarm signal in case any object or body part reached within the range of these sensors.
Safety Light Curtain Working
It has 3 parts in all first of all curtain. These curtains are different in size. Which depends upon require protecting height or covering height. It my be 12 inch to 28 inch depends upon end user requirement. These curtain operates by 24 VDC supply. Similarly it generate 24 VDC signal to Control unit. These curtain may provide + 24 VDC signal to PLC. This signal used in PLC as Command. Second is Control unit it operates 220 VAC. It provide potential free NO / NC contact for next operation
PH Value of Solution
Digital ph Meters, Digital pH Controllers, are mainly used to check ph value of any solution. Hence these digital electronic pH meters having calibration facility for 4 ph. and 7 ph. std. solutions. PH Controller suitable for Maintain ph value of solution with in range required. Two settable screws are provided to set Required range. Upper limit and lower limit. Because of separate relay contact for both side dosing pump connection.
TDS Value Of Water :
Hence TDS Meter is used to check water hardness / total dissolved salt. Hence TDS means impurity of various metals in water. Similarly dust or salt in water increase TDS of water. Above all means TDS meter Shows parts per million. Its measuring unit is P.P.M.
Hence TDS meters used to check of T.D.S. Value. While T.D.S. Controllers used to Control T.D.S. of water. It may be within limits as per required by user. Hence T.D.S. meter mainly used in Salt Spray Chamber. Maintain TDS value of water in Cooling Towers. R.O. water / distillation / food / process Industry / D.M. Water Plants / Chemical Industry Etc.